Steel Framed Industrial Building
We recently supplied a steel-framed industrial building for a client. The building is an Apex-style portal frame design measuring 30m long by 16m wide, with a 6.5m eaves height, a 12.5° pitched roof, and a 1m oversail at one end. The structure is set out on 5m bay centres and is built using heavy-duty galvanised UB steel for long-term durability.
The main frame uses 356×171 and 305×165 UB sections, with CHS rafter bracing and side bay bracing incorporated throughout the building. All steelwork is fully galvanised for weather protection. The roof is constructed using 80mm composite insulated panels in Goosewing Grey, complete with six triple-skin GRP rooflights to provide natural light. Ridge and verge flashings and full rainwater goods are installed as part of the roof system.
The building is clad all around with 60mm composite panels in Anthracite. One of the gable elevations also includes timber Yorkshire boarding fixed over the cladding to add character to the exterior. The design includes multiple large access openings to accommodate vehicles and equipment, along with three lockable personnel doors and ventilation details as required.
The structure also includes galvanised Z purlins, cladding rails, eaves beams, tie wires, and drip-tray flashings. All work has been carried out in accordance with the supplied structural calculations.
The pictures below show the building during the installation phase. We like our photographs to show different stages of the build so our customers can see how we put our structures together from start to finish.